|
20-port 10 GigE Fabric Switch |
Broadcom BCM56800 XGS III
|
Fourteen ATCA Fabric ports for Option 1 or Option 9 payload nodes, individually selectable
|
Five SFP+ ports for 10GigE to front panel or RTM
|
One 10GigE Inter-Switch Link (ISL)
|
IPv4 Switching at Layer 3, IPv6 capable
|
VLANs with flexible Class of Service (COS)
|
Content Aware Processor (CAP) for packet vectoring with OpenArchitect/PV
|
Fabric Switch Control Processor |
OpenArchitect® Linux Switch Control Software
|
Freescale 8270VV at 450MHz (50MHz PCI Bus)
|
256MB ECC SDRAM (100MHz SDRAM Bus)
|
128MB FlashROM for redundant system image
|
Recessed front-panel reset button RS-232 Console RJ-45 to front panel & RTM
|
| |
26-port Base Switch |
24-port 1GigE switch with 2 10GigE ports (BCM56502)
|
Fourteen ATCA Base ports for payload nodes
|
Two SFP+ ports for 10GigE to front panel
|
Three RJ-45 for 10/100/1000Base-T to front panel
|
Four RJ-45 for 10/100/1000Base-T to RTM
|
Two 10/100 Shelf Manager ports (Configurable for Pre or Post ECN.001)
|
One GigE Inter-Switch Link (ISL)
|
IPv4 switching at Layer 3, IPv6 Capable
|
VLANs with flexible Class of Service (COS)
|
Content Aware Processor (CAP) for packet vectoring with OpenArchitect/PV
|
Base Switch Control Processor |
OpenArchitect® Linux Switch Control Software
|
Freescale 8270VV at 450MHz (50MHz PCI Bus)
|
256MB ECC SDRAM (100MHz SDRAM Bus)
|
128MB FlashROM for redundant system image
|
Recessed front-panel reset button
|
RS-232 Console RJ-45 to front panel & RTM
|
10/100 Ethernet RJ-45 OOB to front panel & RTM
|
|
Pigeon Point IPMC |
Front Panel Ethernet 10/100 Port
|
|
|
RTM |
Four Base in-band ports (RJ-45)
|
OOB port for both Base and Fabric
|
Mirrored RS-232 console ports
|
|
|
AdvancedTCA® form factor |
Supports both 14 and 16 slot Chassis
|
Complies with ATCA cooling envelope
|
|
|
Positive-latch ejector handles
|
IPMI Management Module (IPMC) |
Thermal & Fuse-Failure sensors
|
Voltage Sensors for each power rail
|
|
|
ATCA 3.0 compliant E-Key Function
|
Multiple-mode LED status Display |
Link/Activity/Speed Status for Base and Fabric Interface by port number
|
Operational Status of each logical payload slot
|
Front panel mode-select button
|
ATCA Stratum-3 Telco Clock Option |
Uses ZX600 RTM Master Clock Generator
|
|
|
|
Layer 2 and Layer 3 |
Wire-speed L2/L3 Switching
|
Wire-speed L2-L7 Packet Classification
|
|
IEEE 802.1P Class-of-Service
|
IEEE 802.3ad Link Aggregation (static)
|
IEEE 802.1D Spanning Tree (STP)
|
IEEE 802.1D-2004 Rapid Spanning Tree (RSTP)
|
Virtual Router Redundancy Protocol (VRRP)
|
Common Open Policy Service (COPS)
|
Differentiated Services (DiffServ)
|
Sophisticated Load Balancing
|
Port Mirroring in hardware
|
Mangement |
Linux shell interface (bash, et.al.)
|
SNMP management (v1, v2, v3)
|
Secure Shell daemon (SSH v2)
|
DHCP server / client / relay
|
Network Time Protocol (NTP) client
|
Web server (HTTPD) for browser access
|
|
Capacitor-backed Real-time Clock |
Write protect switch for FlashROMs |
OpenArchitect® LED Status Display |
|
OK indicates software ready
|
EXT Fault indicates external cable/link problem
|
INT Fault indicates internal hardware fault
|
Telco Compliance Engineering Standards |
|
RoHS / Japan - Green (JIG A & B)
|
